To be honest I wasn’t expecting to have a system that was super quiet. But this system is. I have never used such a quiet set of bars. I have been using them for the last few months and they have been on the car without boats, with one, two and three boats and each time the noise has been so quiet that it is not really noticeable. There was no need to turn the music up to drown out whistling! Thule reckon there is a 90% reduction in noise compared to the Aero bars. I couldn’t say whether or not it’s 90% but it certainly is virtually silent.
To simplify your ordering process, The Rack Warehouse lists the most popular selling Thule 480 Traverse Foot Complete Car Roof Rack fits alphabetically by Auto Manufacturer. You'll find perfect fitting roof racks for most of today's top selling vehicles on this list. Thule 480 Traverse Foot Complete Car Roof Racks are designed for vehicles with smooth of naked rooflines (no racks or attachments). If you don't see your vehicle on this list, simply click on the Thule Fit Guide at the top of the page, enter your vehicle information and the Thule Fit Guide will do the rest.
Originally I bought them because our car didn't have the width for two boats to sit side-by-side. But they support our plastic touring boats (Necky, Looksha IV), very nicely. The fear of oil-canning the hulls by supporting them in traditional saddles is all but gone. The hull-a-ports hold the boats vertically and in even the strongest cross winds, the two straps (provided, with buckle bumpers) are enough to hold the boats in place with ease...and not so much pressure that you'll bend the hulls.
Anti-Sway Cages – There are a few different ways that racks can be designed to minimize sway, but an anti-sway cage is the most widely used. In particular, you’ll find these on rack designs that hold the top tube, but rear mounted designs that lock the wheels can also benefit from built-in anti-sway tech. In essence, it’s just going to help to keep the bike stable in the rack as you drive. This has the dual benefit of not allowing the bikes to affect vehicle handling (especially at highway speeds) and also stops the bikes knocking into each other.
So, minus one star for false advertising about the end caps. And minus one star for claiming they don't rust, when I'm replacing them because the old ones are rusted. Otherwise, these things are super solid. I've had at least 2 stand up paddleboards and 2 surfboards on the car at once and there's no question these bars can withstand the strain from wind. If something were to break or bend in the whole car/rack combination, it's not going to be these bars in my opinion.
I bought this as an upgrade since we bought the Toyota Sequoia which is wider than my older Mercedes GL. I also ordered the Thule Outrigger which works nicely with the cross bar to load and unload our SUPs easier. The combination works very well. I offer a suggestion I did which also worked well with me. If you want kayaks or boards to roll easily over the cross bars and without scratching try this: Go to Home Depot and buy two 30-40" long (depending on the width of the car top) of 1.5" diameter PVC pipes and two-2" pipes of the same length. The 1.5" will fit inside the 2" pipe nicely and the cross bar will fit into the combination (through the 1.5" of course) very well. This will give you a very nice set of rollers for the two cross bars and if you buy the black color of pipes they will look very professional at a cost of less than $15. I tried so many commercial covers and rollers and nothing worked better than this home made one.
If you want a cheap and easy roof rack solution for short trips look no further than this affordable option from Highland. Although they're rated for a capacity of up to 400 pound, we'd recommend them for lighter items like ladders, kayaks, skis or snowboards. You may want to add a couple extra straps for a bit more security, but if your usual paddling spot or local hill are just a few miles away, this option do the job just fine.
I should've read the gd item description and reviews before I purchased this because these don't come with the end caps like its pictured. Had I known that, I would just gone to REI to purchase these. Also, the bars look used. I'm sure it'll do the job and it will get dirty eventually, but still.... I paid for a new product. All these mf snakes on this mf plane...
With a voluminous 22 cubic feet of storage, the Motion XT XXL is Thule’s highest-end box and comes with loads of bells and whistles, including an internal ski carrier, a slide-lock security system, as well as a total load capacity of 165 pounds. The extra-wide PowerClick quick-mounting system (which offers a welcoming “click” sound as you twist the mounting dial to confirm that the box is properly connected) makes for a fast and secure fitting, and it’s built to sit a bit forward on your crossbars to provide full trunk access for hatchbacks.
You really don't want these on your car at eye/head level without end caps. First, I suspect they'll rust quickly (my old ones rusted even with end caps). Secondly, it's steel that's been cut with a saw- the ends are not jagged but neither are they gently rounded and the covering is shy of the ends by 1/8 inch or so. You hit your head/face on these things and there's a good chance you're coming away bleeding. Third, the ends are ugly without end caps.
Usually two bars that run across the width of the vehicle roof, which you then mount your activity-specific racks to; whether it’s ski racks, bike racks, cargo boxes, kayak racks, etc. Crossbars support the weight of all the gear you’re adding to the roof and transfer the weight to the towers/feet. The major crossbar types include: round (Yakima), square (Thule, Inno), aerodynamic (Thule, Yakima, Whispbar, others), and factory.
Bought for use on my van's roof to hold a 9'1 longboard - already had roof bars up there which turned out to be too thick for the supplied fixings but wasn't too difficult to make it work. Really quick and easy to use. Haven't tried it with two boards but, as some of the other reviews say, it could be a bit tight to fit another board in with the size of strap supplied.