Web Analytics

What a nightmare...spent 4 hours the first day trying to install load bars on my Audi TT (this rack was "specialy designed" for this car...HA!). Returned to dealer several times and they could not do any better. Thule customer service is a joke. They verified the placement of the load bars and the wind deflector is getting in the way of my wipers, WTF! What really iritates me the most is that Yakima does not make a roof rack for my car and I am stuck with this. Going back to dealer one more time to get proper fit, will return and go with Yakima hitch rack if they cant help.
This is a well-made bike rack with an unusual-looking design. The design works better than the FreeRide and ProRide models when it comes to loading on your bike. It also offers better inbuilt security for your bike and furthermore does not touch the frame and so cannot damage the frame. It’s quite a bit more expensive than the FreeRide model and a little bit heavier BUT it is selling at about the same price as the ProRide…it IS better than the ProRide; I guess people don’t buy it because of the looks and the weight.
These attach right onto horizontal roof racks and hold the boat on its side to prevent warpng when tied down. It's very stable and makes it easy to lock the kayak to the rack with a standard cable. It can be pretty hard to load after a day of paddling and sometimes requires two people, even on my low roof. May not be the best for tall vehicles, but an economical alternative.

I use the rapid traverse foot pack and aero blade bars. The foot pack was simple to install and stays rock solid, I check and tighten periodically but they've never been close to loose. The bars are very strong and nearly silent at freeway speeds, which start at 65 in CA. I can easily transport my 2 yaks, I use a cheap j rack bought on Amazon for my smaller lighter kayak and the Yakima even keel for the big heavy one, obviously not a symmetrical setup but they both fit easily in that configuration and I don't have much other choice, my lifetime sportfisher will not fit in J racks. For toting a couple miles to local beaches it's never an issue. I don't bother with nose straps if I'm not going more than 10 miles, but I have for longer trips. In each case there's never been a problem or any movement.

The hull a port system is unpredictable as far as safety goes.the PLASTIC clamp that allen wrenches in underneath your cross bars is not sturdy and should be made of some type of metal to make tis a reliable good system.i was driving 20mphs on a dirt road and i heard a crack and my boat almost completely came loose.can you imagine that situation but on a highway doing 60?tragedy waiting to happen! the closer to you roof you yak is the better.even though i have replacement parts coming and will continue to use the hull a port system.


"Was skeptical at first to see how good their prices were until I saw their Yelp reviews. Best prices out there for crossbars and racks hands down. Shipping was quick despite the fact that Rack Warehouse is located in the East coast (I'm from CA). The same positive feedback can be said on the care the items were packaged. For those unsure if this business legit, not only can I attest to the authenticity of this business but Google has their back too. BTW, Google provides complimentary insurance. Thanks Rack Warehouse I wish I knew about you sooner.
A change of car has forced me to seek out a new set of roofbars. I wanted the best set of roof bars for my car without going silly on the cost. This time I have went for the Thule Wing bars. These are known as the Thule Aeroblades in some parts of the word. I love cars that can have a set of roof bars bolted to them, either to fittings hidden within the roof or roof rails. The new Unsponsored HQ paddle wagon/family transporter is a very sensible two litre 184bhp BMW 320d Sport.

Now we're going to bring it up to the roof line of our Cherokee. I like to put it across, get that side started over there and do the same thing over here. We want this edge to come below our side rail just like that. That's what's going to give us that good firm hold. Make sure that happens on both sides.Once we've got that position, we need to decide where we want our rail to be.
The rack was easier to install than I had thought, though I suspect your average Swede is much stronger than your average American... They show a one hand squeeze on the Aero Foot cam (that scrunches down on the cross bar, securing it). I had to stand and jump up and down on it (please don't void my warranty!) to get the darn thing to close and snap locked. It was almost a show stopper as I would not have been able to get it to close otherwise (I tried squeezing it for dear life with both hand and all my 205 lbs for over 15 minutes before I gave up and stood on the darn thing: closed right up and locked). Other than that, it went in likity-split, and exactly like the fit kit said it would! It took about 45 minutes, counting the isometirc exercises with the cam. I purchased the lock cylinders: I wanted to make those hard to install, but it could not have been easier. The installation instructions are well written and specific for my car (from the fit kit). I do think there should be no charge for the fit kits...

The biggest criticism of the Tandem Carrier is a slight lack of stability due to the rack not having side stabilizer arms as found on competing tandem bike roof racks. To overcome this, one reviewer recommends securing the bike with an additional ratcheting tie down strap—check with your local hardware store—on the bike’s crossbar for extra stability.
I use the rapid traverse foot pack and aero blade bars. The foot pack was simple to install and stays rock solid, I check and tighten periodically but they've never been close to loose. The bars are very strong and nearly silent at freeway speeds, which start at 65 in CA. I can easily transport my 2 yaks, I use a cheap j rack bought on Amazon for my smaller lighter kayak and the Yakima even keel for the big heavy one, obviously not a symmetrical setup but they both fit easily in that configuration and I don't have much other choice, my lifetime sportfisher will not fit in J racks. For toting a couple miles to local beaches it's never an issue. I don't bother with nose straps if I'm not going more than 10 miles, but I have for longer trips. In each case there's never been a problem or any movement.

Locking Cables – These are essentially built-in security devices that wrap a sturdy chain around your bike and lock it into place. This has the obvious advantage of protecting your bike from any opportunistic thieves who could look to steal it straight off the rack. Bear in mind that typically you’re only going to see this feature included as standard on the more premium models. Some of the products we looked at above did have a locking cable as an option to buy separately, so check if the rack comes pre-equipped if you want a cable.
To simplify your ordering process, The Rack Warehouse lists the most popular selling Thule 480 Traverse Foot Complete Car Roof Rack fits alphabetically by Auto Manufacturer. You'll find perfect fitting roof racks for most of today's top selling vehicles on this list. Thule 480 Traverse Foot Complete Car Roof Racks are designed for vehicles with smooth of naked rooflines (no racks or attachments). If you don't see your vehicle on this list, simply click on the Thule Fit Guide at the top of the page, enter your vehicle information and the Thule Fit Guide will do the rest.
On the other hand, it is very easy to use, with a pair of ratchet arms that securely lock the bike during transit, and are very simple to use – they also have a pretty wide loading range, and can accommodate up to 59cm frames. They also have a good load capacity of up to 35 pounds per bike position, which should be more than ample for the vast majority of bike types.
I can't comment on J carriers because I don't use them, but perhaps I should. The design weakness with Thule is the square bars, which only becomes a problem on curved roofs, but as the roof curves so must cradles cant away from each other, reducing contact between boat hull and cradle to inside edges. The cradle faces are absurdly small to start with; this rotational deviation from level makes it even smaller. Couple that with Thule's comically inadequate détente angle fixing clamp (for holding the saddle in the shape of your boat hull) and for support you are probably better off using foam blocks. So J carriers may work better on a curved roof, if I can lift that high. I've seen some people use them for composite boats so it might be OK.
Shortly after we bought the rack, our little mazda 2 was rear ended by a texting idiot. Before the car was repaired, I decided to try and test the rack to see if I could damage the tailgate with the rack. I tightened it up really hard and grabbed the mounting arms and shook the car around on it's suspension and it did not bend or damage the tailgates panel edges at all.
Choose aerodynamic roof bars for superior performance and a sleek, sophisticated look that complements the lines of your car. These roof rack cross bars also have many smart design features. A textured surface disturbs the airflow and greatly reduces wind noise. The aluminium extrusion creates one of the strongest load bars in the market. The design gives you quick, no-hassle installation. While the end cap pivots and T-track make it easy to add further loading options.
×