Web Analytics

I managed to install two ProRides, the UpRide and a FreeRide simultaneously on one car (ie 4 bike racks). A total of 3 is relatively easy but adding the fourth bike rack required the pedals to be removed from the bikes and was quite a squeeze. If you are going to install 3 or 4 bike racks then you will need to alternate the direction in which they face (forward-back-forward-back) and you will need to ensure that the various closing mechanisms on each of the bike racks are relatively easily accessible. Good luck 😉 !
Thule Base Rack System Reviewed by Chris K (Levittown, PA) Reviewed for a 2002 Jeep Liberty — 2007-11-30 07:02:02 After traveling quite a bit with the family i decided to upgrade and purchase the thule rack system to add to my factory rails. Once I received the package in the mail it took only minutes to install the mounts and crossbars. I was impressed with how well constructed this product was and I would definitely recommend this to anyone having an existing rails sytem to go forward and purchase this complete rack system by thule. It has a huge impact on how you travel and is well worth the money I paid for it. VIEW MORE REVIEWSShop Thule Base Rack System | Shop Thule
Dear Phil, I have read over the reviews you sent us regarding the Thule Hull-a-Port. Being the manager in charge of returns, warranties, and exchanges at the Rack Warehouse I have had some experience with the problems noted in the reviews. The problem of the plastic mounting hardware breaking has happened before, but it is not at all common. Since we have sold the Hull-a-Port, we have had two sent back to us for warranty of this problem. Both of these racks came back last year (the first year this product was available), and this year's Hull-a-Ports have not been any problem for us. We have sold hundreds of units this summer, without one call about this problem. Usually people get back to us right away if there are problems with the system we sent them. I suggest the Hull-a-Port as an option for many people because of its ease of use and flexibility. If you are worried about the mounting brackets, I would suggest following one of the reviewer's advice and secure the boat down to the bar as well. I always use the load bar to secure my straps because the bars are always stronger than the accessory on top of them. Also, both the box the rack comes in and the instructions tell you that the bow and stern strap is required. To be on the safe side and ease your mind, use the bow / stern straps. Please call me if you have more questions or concerns. Thank you, Mary S., The Rack Warehouse 800-272-5362

You see we've already got our front rail installed. Just use a reference mark here to make sure we have that in line. You're going to do the same thing here in the backside.Once we have that position from both sides, we want to check the overhang that we have on our bars. We'll just add as well. The overhang's going to be this portion here. I just want to make sure we have equal overhang on both sides. It doesn't have to be perfect, but it certainly looks better if it is. All right. Once we've got that where we want it, you want to grab the tool that is provided. This is a torque limiting tool, so basically it's going to tell us when we have our bars tightened down all the way. This is a four nanometer tool. Right here it says Ford inaudible 00:02:09 Newton meter, this is a Ford Newton meter clamp. So, we'll just start tightening this up. I like to snug this one down pretty well. Make sure that this portion here comes over and makes contact with my race side rail there. Once I get that pretty snug, I'm going to go over and do that other side.Now, these roof rack systems are going to be an excellent way to free up some space inside your vehicle of course. Bike racks, cargo carriers, rooftop cargo boxes, kayak carriers, just all kinds of different accessories that you can put up here on the roof line. Ski and snowboard carriers or really the enclosed ones, even if you want to transport some luggage and stuff like that, keep them out of the elements. Now I'm gonna go ahead and torque this one down until my tool indicates, you see that's just like a gas cap basically. Once it's tight enough, it's just going to click. Same thing here.Now with the Evo Bar, something I do like, you see this cap is going to come right open. That allows us to get into our T-slot accessory and no longer do we have to remove the long rubber strip and cut it. Our accessory can slide right in that gap and almost self seals right around it. Makes it really easy to use. Just pop that back down like that. To finish up our install though, we do want to cap off our end caps here. Tab here is going to go on the top, push that bottom in and at that point, you'll just rotate this 180 degrees into it's locked position to lock that cap on. These are just plastic cores. You can do these using a screwdriver, so if you wanted additional security, you want it to be able to lock and we do have the Thule locking keys you can put in there and then actually have a key lock to keep that nice and protected.The bars do come in a black or a silver, so if you wanted something to blend in with the Cherokee, I'd go with the silver. You want something to stand out, I'd go with the black and then I'll show you on that front bar here on the bottom side, once we get everything in position, we've got a little tab right here. We pull that tab over to our foot pack. That's going to eliminate any gaps in the bottom of that crossbar. Really going to help to eliminate wind noise. You can see right here, just gonna pull that over. It's going to close up that gap. Same thing on our front bar. Th
The data shown here, particularly the database as a whole, shall not be copied. The Data User shall refrain from copying and disseminating the data or the database as a whole and / or from causing such acts to be carried out by third parties, without TecDoc's prior consent. Any violation shall constitute a copyright infringement and shall be subject to prosecution.
The lid has dual-layer construction, which adds stiffness for durability and ease-of-use while reducing drag for better MPG, as well as to lessen the noise. Spring-loaded hinges make accessing the box from either side of the vehicle a breeze, with lockable Smartlatch handles help make sure everything is shut up tight. Clamp mounts make the box compatible with most roof rack bar systems, though you’ll probably want to upgrade to one of Whispbar’s mounts to complete the look.
Thule Stacker Kayak Carrier Reviewed by Lisa J (Osceola, WI) — 2011-08-24 13:05:08 We were able to easily mount two sets of the Thule Stacker on the factory roof racks on our mini van, and easily carried our three kayaks that way. The tie down straps worked very well, and getting the kayaks on and off was easy. VIEW MORE REVIEWSShop Thule Stacker Kayak Carrier | Shop Thule
The hull a port I like it because it fits almost every rack. And like most of the reviews wonder why it has plastic mountings. Well, figured that out one day when driving under a garage where the door was a little low. The clamps under the hull a port broke. But then don't think they were designed to drive into a roof. Have tightened those hex bolts pretty tight, so the plastic bends but doesn't break under designed usage. But the hullaports do shimmy and shake when there isn't a boat attached. The angle of the j-shape fits one of my boats perfectly (Chilco) but on my Quest it isn't deep enough, I would like a better fit.
There were a few types of bar I could have chosen. Firstly the bog standard square bars, which are pretty good but they don’t have the T channel for quick attachment of bike carriers and roof boxes. They still work really well but I have a few bits that use the T bolt system and I really like it for ease and security. The second is the Aero bars system which I have used a great deal in the past. They are again good, but I found them to be a little noisy on the cars I have had in the past. This may have been down to the bars or the foot system, or the way I had fitted them. The Aero bars do have the T channel which still makes them a contender. OEM bars tend to be very similar to the Thule Aero bars anyway. However for a little bit more cash the Thule Wing bars offer a lower profile, a reported 55% reduction in drag compared to the Aero bars and a possibility of an overall quieter system. After a hunt around (see below) I got the Wing bars for the price of a set of Aero bars
Be careful with Wingbar Edge. They are supposed to be quieter than 961 bars + 753 foot pack but they are probably not. I both wingbar edge for BMW 5er Touring, with 4022 kit. Plastic cover, covering foot and kit (and securing the rack with the lock) does not fit tight, there is a 2-3mm slot. I suppose this is a reason of whistling, with high frequencies. With box on roof rack I was not hearing that, there was heavy noise coming from the box. After removing the box whistling was so annoying that I removed front bar from the roof on the gas station – I was not able to drive with it on the roof!
The covers for the the TK8 fit kit do not sit flush on the car. There is a rather substantial gap on the inside edge of the cover. This allows water to get under the trim. Thule recommended smearing a heavy layer of grease on the metal under the rail twice a year so that the metal does not rust. This is a problem. The gap is obvious and also does not look good. Thule has been aware of this problem for a couple of years and have chosen not to rectify it.
The covers for the the TK8 fit kit do not sit flush on the car. There is a rather substantial gap on the inside edge of the cover. This allows water to get under the trim. Thule recommended smearing a heavy layer of grease on the metal under the rail twice a year so that the metal does not rust. This is a problem. The gap is obvious and also does not look good. Thule has been aware of this problem for a couple of years and have chosen not to rectify it.
THEFT: A determined and well-prepared thief will have the tools to steal your bike in any case. I would imagine that, with an expensive bike, the thief might not be too concerned about prizing open the frame clamp and damaging the frame as the re-sale value of untraceable and expensive bike parts would more than compensate them for their efforts. The ProRide’s anti-theft mechanisms are sufficient to prevent the casual thief. Use your own bike lock when parked to better deter would-be thieves ie lock the bike to the roof bars with a motorbike lock or similar
The WBT31 comes fully built and ready to use. Optional extras include a wall storage hook (£10) if you want to keep it off the floor, a dust/rain cover (£20), good for storing in a hostile environment, and a ramp (£35) for loading heavy bikes or if you aren't happy lifting them vertically onto the rack. The ramp fits all four bike positions on either side and stows securely in a holder on the rack, ready to use at your destination. I always used the ramp for getting our 30kg (plus whatever's in the panniers) Workcycles FR8 Dutch bike on and off the rack – it's fast to use and minimises the risk of slipping and dropping a very heavy bike.

Aluminium bars include T-track slots which allow you to use the full length of the bars for load carrying. The WingBar not only looks good but more importantly includes a device which reduces wind noise to the minimum, as well as reducing drag. Many customers leave their Thule WingBars in place from week to week, especially if they are taller vehicles and fitting is awkward.
×