Web Analytics

Disclosure: The Adventure Junkies is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. This means if you click on the link and purchase the item, we will receive an affiliate commission at no extra cost for you. We also use other affiliate programs like REI, LeisurePro, Diviac and Liveaboard.com.
Aluminium bars include T-track slots which allow you to use the full length of the bars for load carrying. The WingBar not only looks good but more importantly includes a device which reduces wind noise to the minimum, as well as reducing drag. Many customers leave their Thule WingBars in place from week to week, especially if they are taller vehicles and fitting is awkward.
I compared the parts list for the 815 with the parts list for the 835XTR Hull-a-Port that appears on Thule's website and they're almost identical. The only differences are that the carriage bolts and end caps, while the same size, have different part numbers, and the 815 does not include the two 1/4 inch Rope Ratchets that are included with the 835XTR. While the Rope Ratchets are nice for tightening and securing the bow and stern tie-downs, they're not really necessary if you can tie a decent knot.
The sleek, aerodynamic design cuts down on drag and wind noise, and the quick-release hardware makes it easy to mount; it works with most round, square, and aerodynamic bars, with a minimum/maximum cross bar spread between 24 to 42 inches. As with most Yakima boxes, it’s made in the United States with up to 80 percent recycled material, and you can add a cargo net (separate purchase) that attaches to built-in tie-down points and divides the storage space into four-foot squares. The Skybox comes in five sizes, from 12 cubic feet up to a cavernous 21 cubic feet.
Preloved and the heart device is a registered trademark of Moo Limited. Preloved, The Joy of Second Hand, Preloved People and The Second Hander are trademarks of Moo Limited. Copyright 1997 – 2018 Moo Limited. All Rights Reserved. Use of this web site constitutes acceptance of the Preloved Terms and Conditions, Privacy Policy and Cookies Policy. You can manage cookies here.
Ironically, after posting my review of the Thule J-racks, I just about lost a kayak this past weekend coming back from Maine, due to the cheap mounting hardware included with the Thule J-rack. One of the plastic mounting bars split- where the bolt is held in place by the recessed nut- and the front rack was only held on by the one remaining mounting bar. It was not pleasant to see my kayak sliding towards the outside of the roof rack, going down I95 in Maine. Unless Thule changes the mounting hardware from plastic to metal, this rack is a dangerous. Cheap mounting seems to be a theme with Thule.

Don't get me wrong. I use Thule racks and locks and cradles and locking cable and straps… the whole kit. That's because security and convenience and bicycles and protecting the roof of my car are also important, and because I started with a used Thule rack, gradually accumulating a closet full of proprietary extrapolations and substitutions as needs changed. And it does work. It all works. It's just that every single bit of it is clumsily engineered and imprecisely manufactured, requiring brute force as well as wiggling and finagling to get it just right. Some parts fit loosely, some tightly, some are robust and some flimsy. Every change, every adjustment to a Thule rack is a project and a series of compromises. Admittedly, I change things around a lot, but as familiar as I've become with my rack, I still spend an inordinate amount of time getting all the parts straight and tight and solid before I reach for my boats.

Please, whatever you use, tie down the bow and stern. It doesn't matter how many times you haven't and nothing bad happened. It doesn't matter how little it shifts in the wind. It doesn't matter that you're 15 minutes from home and only driving on pavement. The point is that if a strap breaks you could easily kill someone in a following car. I read somewhere that no boat is ready to drive away until it has 6 lines on it: two each across the midsection, triangulated from the bow and triangulated from the stern. Take it to heart.
trailer car trailer number plate private number plate car ramps car roof box box trailer motorcycle trailer small trailer twin axle trailer car transporter trailer towing dolly trolley jack towbar ford focus roof bars tipping trailer 750kg trailer thule roof bars private registration car diagnostic roof bars vauxhall exodus roof box cherished number plate car jack peugeot roof bars mercedes roof bars car battery charger axle stands car mats nissan navara jump starter

There are a number of roof rack manufacturers providing equipment that although suits a purpose, is not suitable for carrying canoes, kayaks or bikes as it cannot handle the weight of these items. We exclusively sell Thule roof racks and cycle carriers which are well designed and can handle the weight and bulk of modern sports equipment. We don't sell anything we wouldn't be happy using ourselves and we're a picky bunch!

For your convenience, The Rack Warehouse lists the most popular selling Thule 460 Podium Foot Complete Car Roof Rack fits alphabetically by Auto Manufacturer. You'll find perfect fitting roof racks for most of today's top selling vehicles on this list. Thule 460 Podium Foot Complete Car Roof Racks are designed for vehicles with factory fixed points, rail tracks and bolt through applications. If you don't see your vehicle on this list, simply click on the Thule Fit Guide at the top of the page, enter your vehicle information and the Thule Fit Guide will do the rest.

I own and use two Thule 815 Kayak Cradles that were purchased from Dick's Sporting Goods (DSG). Interestingly, there is no information about them on Thule's website. Apparently, the 815 is made to DSG's specifications. One I bought used off of eBay for $75 plus $13.25 shipping. According to the seller, it was used for three seasons before I got it. The other I just bought at DSG for $79.99 ($99.99 less a $20 off coupon) plus $4.80 tax. The box indicates that it was manufactured this year.


For your convenience, The Rack Warehouse lists the most popular selling Thule 460 Podium Foot Complete Car Roof Rack fits alphabetically by Auto Manufacturer. You'll find perfect fitting roof racks for most of today's top selling vehicles on this list. Thule 460 Podium Foot Complete Car Roof Racks are designed for vehicles with factory fixed points, rail tracks and bolt through applications. If you don't see your vehicle on this list, simply click on the Thule Fit Guide at the top of the page, enter your vehicle information and the Thule Fit Guide will do the rest.
These attach right onto horizontal roof racks and hold the boat on its side to prevent warpng when tied down. It's very stable and makes it easy to lock the kayak to the rack with a standard cable. It can be pretty hard to load after a day of paddling and sometimes requires two people, even on my low roof. May not be the best for tall vehicles, but an economical alternative.
To aid you with your rack selection process, The Rack Warehouse lists the most popular selling Thule 460R Rapid Podium Foot Complete Car Roof Rack fits alphabetically by Auto Manufacturer. You'll find perfect fitting roof racks for most of today's top selling vehicles on this list. Thule 460R Rapid Podium Foot Complete Car Roof Racks are designed for vehicles with factory fixed points, rail tracks and bolt through applications. If you don't see your vehicle on this list, simply click on the Thule Fit Guide at the top of the page, enter your vehicle information and the Thule Fit Guide will do the rest.

You see we've already got our front rail installed. Just use a reference mark here to make sure we have that in line. You're going to do the same thing here in the backside.Once we have that position from both sides, we want to check the overhang that we have on our bars. We'll just add as well. The overhang's going to be this portion here. I just want to make sure we have equal overhang on both sides. It doesn't have to be perfect, but it certainly looks better if it is. All right. Once we've got that where we want it, you want to grab the tool that is provided. This is a torque limiting tool, so basically it's going to tell us when we have our bars tightened down all the way. This is a four nanometer tool. Right here it says Ford inaudible 00:02:09 Newton meter, this is a Ford Newton meter clamp. So, we'll just start tightening this up. I like to snug this one down pretty well. Make sure that this portion here comes over and makes contact with my race side rail there. Once I get that pretty snug, I'm going to go over and do that other side.Now, these roof rack systems are going to be an excellent way to free up some space inside your vehicle of course. Bike racks, cargo carriers, rooftop cargo boxes, kayak carriers, just all kinds of different accessories that you can put up here on the roof line. Ski and snowboard carriers or really the enclosed ones, even if you want to transport some luggage and stuff like that, keep them out of the elements. Now I'm gonna go ahead and torque this one down until my tool indicates, you see that's just like a gas cap basically. Once it's tight enough, it's just going to click. Same thing here.Now with the Evo Bar, something I do like, you see this cap is going to come right open. That allows us to get into our T-slot accessory and no longer do we have to remove the long rubber strip and cut it. Our accessory can slide right in that gap and almost self seals right around it. Makes it really easy to use. Just pop that back down like that. To finish up our install though, we do want to cap off our end caps here. Tab here is going to go on the top, push that bottom in and at that point, you'll just rotate this 180 degrees into it's locked position to lock that cap on. These are just plastic cores. You can do these using a screwdriver, so if you wanted additional security, you want it to be able to lock and we do have the Thule locking keys you can put in there and then actually have a key lock to keep that nice and protected.The bars do come in a black or a silver, so if you wanted something to blend in with the Cherokee, I'd go with the silver. You want something to stand out, I'd go with the black and then I'll show you on that front bar here on the bottom side, once we get everything in position, we've got a little tab right here. We pull that tab over to our foot pack. That's going to eliminate any gaps in the bottom of that crossbar. Really going to help to eliminate wind noise. You can see right here, just gonna pull that over. It's going to close up that gap. Same thing on our front bar. Th


Hitch Mounted – These types of the rack are connected up to the receiver hitch at the back of the vehicle. They tend to be very strong and stable, and often pack in more features than you may find on the other styles. The main benefit of these types is that they are lower and easier to load then the roof-mounted versions. They also largely keep the bike out of the vehicle airflow, helping minimize the impact on your fuel consumption. The negative is they can affect your rearview when driving, they can make trunk access difficult or even impossible and you must remember you have the rack mounted when you are reversing!
I recently put my Thule J-racks on for their second season of use, only to fine that the mounting hardware is not for its second summer of use. The mounting bars (plastic) are cheap and split easily. There is a bolt inside the mounting bar that is supposed to stay stationary so that the bolt may tighten the rack to the rack. When plastic mounting bar splits, which doesn't take much, the bolt moves around making the hardware useless. Also, the bolts included with the racks rust at the mere mention of water. (Probably not the best thing for a kayak rack). The upside is that the J-rack itself is great, its just the mounting hardware that stinks- which can be replaced. I've yet to do it so I can't speak to how easy that is. Its not a bad rack for $85, just be prepared to replace and be careful witht the mounting hardware aspect of it.
Choose aerodynamic roof bars for superior performance and a sleek, sophisticated look that complements the lines of your car. These roof rack cross bars also have many smart design features. A textured surface disturbs the airflow and greatly reduces wind noise. The aluminium extrusion creates one of the strongest load bars in the market. The design gives you quick, no-hassle installation. While the end cap pivots and T-track make it easy to add further loading options.
×