I don’t get this comment. With the square bars you just clamp anything straight on. With the slots you have to faff about with the plastic strip in the slot don’t you (ie. cutting it to the right size, slotting bits of it in and out in the right combination for whatever you’re putting on). Or do people not use the strip. I’m not trying to be augmentative BTW, genuinely interested I currently have square bars but am considering aero/wing bars for an imminent car change.
Wobble – This is probably the most important point. I think I’m reasonably good at looking at things and then extrapolating how I think they will work. To me the UpRide design looked like the bike would wobble like crazy. However IT DOES NOT WOBBLE LIKE CRAZY. I would say that I was surprised to find that there is LESS wobble than with the other, cheaper Thule bike roof racks. It seems that fixing the front wheel absolutely solidly is the thing to do.
I was given my first Thule system back in 1992 when Thule was a sponsor of mine. I used that basic rack system along with numerous accessories up until the summer of 2015. The load bars were finally rusting [where I had drilled holes in them] and I felt I needed to replace them. My towers and my locks, however, are still my 1992 originals, and they're doing great.
Rather than going for a pack put together by a roof rack shop or supplier I decided to visit the Thule website, find the make, model and year of my car to create a shopping list of the parts required. This is a simple but crucial process as the different possible combinations of bars, foot pack and fitting kit is enormous. Once checked I sourced each of the parts from different suppliers on Amazon. This saved around 20% and as I have Amazon Prime included free delivery.
Part conservationists, part outdoorsman, part storyteller, Matt has devoted much of his life to environmentalism and that crafty, fleeting mistress known as writing. Having worked with over two-dozen brands and lifestyle publications, he’s carried out his passion for all things flora, fauna, and fiction through a litany of written mediums — one adventure, one sentence at a time.
You really don't want these on your car at eye/head level without end caps. First, I suspect they'll rust quickly (my old ones rusted even with end caps). Secondly, it's steel that's been cut with a saw- the ends are not jagged but neither are they gently rounded and the covering is shy of the ends by 1/8 inch or so. You hit your head/face on these things and there's a good chance you're coming away bleeding. Third, the ends are ugly without end caps.
As expected. Installation was a little tricky. First I got the wrong 'foot kit' for my vehicle on accident. Once that was corrected, the measurements in the included instructions were wrong for my vehicle. I looked up my kit online, found that there was a new version of the manual with new measurements for my vehicle. This turned out to be a closer fit but still not quite right. I had to 'widen' the measurements slightly... in order to allow the "doors" on the "feet" to close (these are the doors where you use the tool to crank down the brackets to your vehicle body to ensure a snug fit). Once completed, I'm happy with the product, just wish the installation instructions were a little easier to follow. There is an online video available through the 'thule fit guide' which was helpful but also not entirely accurate. I like this product because it is "modular" in the sense that when ski season is over, I can remove the attached ski racks and replace with bike/kayak racks.
If you want a cheap and easy roof rack solution for short trips look no further than this affordable option from Highland. Although they're rated for a capacity of up to 400 pound, we'd recommend them for lighter items like ladders, kayaks, skis or snowboards. You may want to add a couple extra straps for a bit more security, but if your usual paddling spot or local hill are just a few miles away, this option do the job just fine.
The one addition I’d like to see made to this is a clip to hold the wheel straps out of the way when putting the bike in place. You can tuck them behind the wheel mount, but I found they would often flip back over and get in between the tyre and the mount meaning you had to put the bike down, tuck the strap out of the way again before picking the bike up to put in place. Not a big deal, just mildly annoying.
I bought these Aero bars for my 2016 Jeep Wrangler Unlimited. Also purchased the Thule 300R gutter low feet. Make sure you link out to the Thule site to determine the right combinations of feet/bars to fit your vehicle when placing your order. The bars are good quality but installation instructions are a joke. They reference the foot pack for installation instructions. The foot pack tells you nothing beyond a vague illustration on how to install. Here is what I found out after several attempts and gouging out flesh on my left thumb:
Trunk mounted styles like this one are usually easier to load than roof rack versions, however, this model takes that ease to a whole new level. Bikes simply slot on about a foot of the ground, with a set of well-designed ratchet arms locking them easily into place. It even boasts an integrated cable lock to lock the bikes to the rack for added security.
I contacted Thule's tech services and was told that the aluminum mounting clamps would not hit the field until March 2003 and that it might be late March at that. They will still have the capability to clamp to bars up to 2.5" wide. They will still ship with 50mm and 60mm screws. They also stated that some (maybe all?) of the saddle type carriers would get a four position locking set-up that would allow them to lock nearly vertical for a shell on down to flat for a windsurfer.
If your road trips always include skis, snowboards, surfboards, deep sea fishing poles, or other items that often stretch the length of most sedans, the Inno Shadow 16 has you covered. Though it only boasts 11 cubic feet of storage, it can accommodate up to six snowboards, eight skis, or two surfboards. The proprietary Memory Mount System makes it easy to toss the box on and off as needed without fiddling with over-engineered mounting hassles. Its svelte profile and “Diffuser Design” lets it slice through wind to reduce drag and noise, with a three-layer sheet base construction that makes it lighter and stronger than most conventional carbo boxes. As with most models, it opens from both sides and has universal cross bar compatibility.
The biggest criticism of the Tandem Carrier is a slight lack of stability due to the rack not having side stabilizer arms as found on competing tandem bike roof racks. To overcome this, one reviewer recommends securing the bike with an additional ratcheting tie down strap—check with your local hardware store—on the bike’s crossbar for extra stability.
Disclosure: The Adventure Junkies is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. This means if you click on the link and purchase the item, we will receive an affiliate commission at no extra cost for you. We also use other affiliate programs like REI, LeisurePro, Diviac and Liveaboard.com.
Thule’s number one priority is safety – for you and the people around you. Our fit kits ensure your roof rack fits your car as safely and securely as possible. Also, at the Thule Test Center™, our products are only given the official seal of approval once they’ve survived numerous crash tests, wear and tear simulations, as well as extreme heat, cold, damp, sunlight and even harsh chemicals. All so you’re free to concentrate on the adventures ahead.