This is an excellent value single bike rack. The only issue I had was that it took up more space on the roof bars than anticipated meaning the roof box had to be sacrificed due to it's width, and my "budget" Lidl roof bars have a 13mm channel therefore the T-bar fittings couldn't be used. However, the universal fitting kit is very secure. Once on the vehicle, the rack excels...one quick turn of the knob while supporting the bike with the other hand on top of a 4x4 was simple and every aspect of the design has been thought about.
I started my ‘Roof Bar career’ with some cheap ones I used for windsurfing, and they lasted about 6 months before the powder coating started to split and corrosion set in. I then did what my brother told me to do from the start and buy Thule. That first set lasted about 8yrs as a permanent feature on my Vauxhall Nova and looked almost brand new when I removed them. I’ve never considered anything else since. They may appear expensive up front, but it’s not like a handbag where you’re paying for a brand name and nothing more, you’re paying for a proper quality engineered product.
The hull a port I like it because it fits almost every rack. And like most of the reviews wonder why it has plastic mountings. Well, figured that out one day when driving under a garage where the door was a little low. The clamps under the hull a port broke. But then don't think they were designed to drive into a roof. Have tightened those hex bolts pretty tight, so the plastic bends but doesn't break under designed usage. But the hullaports do shimmy and shake when there isn't a boat attached. The angle of the j-shape fits one of my boats perfectly (Chilco) but on my Quest it isn't deep enough, I would like a better fit.
Disclosure: The Adventure Junkies is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. This means if you click on the link and purchase the item, we will receive an affiliate commission at no extra cost for you. We also use other affiliate programs like REI, LeisurePro, Diviac and Liveaboard.com.
THEFT: A determined and well-prepared thief will have the tools to steal your bike in any case. I would imagine that, with an expensive bike, the thief might not be too concerned about prizing open the frame clamp and damaging the frame as the re-sale value of untraceable and expensive bike parts would more than compensate them for their efforts. The ProRide’s anti-theft mechanisms are sufficient to prevent the casual thief. Use your own bike lock when parked to better deter would-be thieves ie lock the bike to the roof bars with a motorbike lock or similar
The most likely causes of excessive wobble at speed on a motorway are either that you have not placed the arm clamp sufficiently close to the chainring OR you have not tightened the clamp sufficiently. Having said that, there is a further cause where the clamp can slip UP the frame IF your frame gets thinner in that direction (eg My Cervelo S3 does precisely that). In that scenario you will need to put the arm clamp slightly further away from the chainrings at a thinner part of the frame.
For your convenience, The Rack Warehouse lists the most popular selling Thule 460 Podium Foot Complete Car Roof Rack fits alphabetically by Auto Manufacturer. You'll find perfect fitting roof racks for most of today's top selling vehicles on this list. Thule 460 Podium Foot Complete Car Roof Racks are designed for vehicles with factory fixed points, rail tracks and bolt through applications. If you don't see your vehicle on this list, simply click on the Thule Fit Guide at the top of the page, enter your vehicle information and the Thule Fit Guide will do the rest.
I purchased a 2015 F150 and needed to upgrade my load bars for my Thule Kayak Hullavator system. I was using 58" bars on a 2013 F150 and they were just barely long enough. After measuring the old bars (58") on the new truck, I was worried they wouldn't be wide enough for my Hullavator system so I purchased the 65" bars (as suggested by Thule). I'm glad I did as the shorter bars would have allowed the kayak lift to hit the side of my truck.
Thule Rack mounted to factory rack on a VW station wagon. H2go Saddles in front, Hydroglides in back. Likes: Strength of system. Dislikes: All the saddles. Hydroglides can easily scratch the boat while you are getting the end on them, I need to set an ensolite pad on them to keep them open. The spring on one pad has broken in less that 10 kayak carrying days. I would much rather have used covers on standard saddles, see yakrackbooties.com (paddling.com sponsor). Also need to permanently fix a pad to the bar between the saddles. The H2go pads do not conform as well as they could. I bet the old ones with the three position locking tabs were better. They need more springiness. If Thule made the saddles as well as they make the bars and towers I would be a lot happier with the product. If they do not improve, I am not sure whether I would buy them again regardless of their superior strength. I have no affiliation with any paddling industry company.
Thule’s number one priority is safety – for you and the people around you. Our fit kits ensure your roof rack fits your car as safely and securely as possible. Also, at the Thule Test Center™, our products are only given the official seal of approval once they’ve survived numerous crash tests, wear and tear simulations, as well as extreme heat, cold, damp, sunlight and even harsh chemicals. All so you’re free to concentrate on the adventures ahead.