Web Analytics

Maybe you're vertically challenged. Maybe your roof is occupied with mountain bikes. Or maybe you're the worst at packing and you always bring way too much gear. Whatever the case, this heavy duty cargo rack attaches to your trailer hitch in a jiffy. Keep a few coolers here for easy access to snacks on the road, or load it up with muddy gear that you'd rather not bring inside the car. Let road trip season begin!
You see we've already got our front rail installed. Just use a reference mark here to make sure we have that in line. You're going to do the same thing here in the backside.Once we have that position from both sides, we want to check the overhang that we have on our bars. We'll just add as well. The overhang's going to be this portion here. I just want to make sure we have equal overhang on both sides. It doesn't have to be perfect, but it certainly looks better if it is. All right. Once we've got that where we want it, you want to grab the tool that is provided. This is a torque limiting tool, so basically it's going to tell us when we have our bars tightened down all the way. This is a four nanometer tool. Right here it says Ford inaudible 00:02:09 Newton meter, this is a Ford Newton meter clamp. So, we'll just start tightening this up. I like to snug this one down pretty well. Make sure that this portion here comes over and makes contact with my race side rail there. Once I get that pretty snug, I'm going to go over and do that other side.Now, these roof rack systems are going to be an excellent way to free up some space inside your vehicle of course. Bike racks, cargo carriers, rooftop cargo boxes, kayak carriers, just all kinds of different accessories that you can put up here on the roof line. Ski and snowboard carriers or really the enclosed ones, even if you want to transport some luggage and stuff like that, keep them out of the elements. Now I'm gonna go ahead and torque this one down until my tool indicates, you see that's just like a gas cap basically. Once it's tight enough, it's just going to click. Same thing here.Now with the Evo Bar, something I do like, you see this cap is going to come right open. That allows us to get into our T-slot accessory and no longer do we have to remove the long rubber strip and cut it. Our accessory can slide right in that gap and almost self seals right around it. Makes it really easy to use. Just pop that back down like that. To finish up our install though, we do want to cap off our end caps here. Tab here is going to go on the top, push that bottom in and at that point, you'll just rotate this 180 degrees into it's locked position to lock that cap on. These are just plastic cores. You can do these using a screwdriver, so if you wanted additional security, you want it to be able to lock and we do have the Thule locking keys you can put in there and then actually have a key lock to keep that nice and protected.The bars do come in a black or a silver, so if you wanted something to blend in with the Cherokee, I'd go with the silver. You want something to stand out, I'd go with the black and then I'll show you on that front bar here on the bottom side, once we get everything in position, we've got a little tab right here. We pull that tab over to our foot pack. That's going to eliminate any gaps in the bottom of that crossbar. Really going to help to eliminate wind noise. You can see right here, just gonna pull that over. It's going to close up that gap. Same thing on our front bar. Th
The covers for the the TK8 fit kit do not sit flush on the car. There is a rather substantial gap on the inside edge of the cover. This allows water to get under the trim. Thule recommended smearing a heavy layer of grease on the metal under the rail twice a year so that the metal does not rust. This is a problem. The gap is obvious and also does not look good. Thule has been aware of this problem for a couple of years and have chosen not to rectify it.
Thule Rack mounted to factory rack on a VW station wagon. H2go Saddles in front, Hydroglides in back. Likes: Strength of system. Dislikes: All the saddles. Hydroglides can easily scratch the boat while you are getting the end on them, I need to set an ensolite pad on them to keep them open. The spring on one pad has broken in less that 10 kayak carrying days. I would much rather have used covers on standard saddles, see yakrackbooties.com (paddling.com sponsor). Also need to permanently fix a pad to the bar between the saddles. The H2go pads do not conform as well as they could. I bet the old ones with the three position locking tabs were better. They need more springiness. If Thule made the saddles as well as they make the bars and towers I would be a lot happier with the product. If they do not improve, I am not sure whether I would buy them again regardless of their superior strength. I have no affiliation with any paddling industry company.

Thule Winter sport racks let you live your winter passion thanks to a full choice of ski and snowboard racks. Not to mention ski boxes that also let you store your boots and poles plus all your other gear. Just load everything you want and head for the snow. And you can always be sure your equipment arrives in perfect shape – at the Thule Test Center™ we rigorously test our winter sport racks for road safety as well as their ability to withstand extreme weather. Leaving you free to think about the adventure ahead!
TYRE DEFLATION: This has never happened to me. In theory if this happened during transport then the bike would become considerably more loosely attached. I don’t think it would fall off as the two front arms are locked together in place. If you purposefully deflated the tyres before attaching the bike to the UpRide then I would guess that vibration during transport WOULD damage your wheel rims to a small degree. Thieves MAY deflate your tyres to make the bike OR WHEEL more easy to remove – remember they can easily take out your wheel skewers.
Ironically, after posting my review of the Thule J-racks, I just about lost a kayak this past weekend coming back from Maine, due to the cheap mounting hardware included with the Thule J-rack. One of the plastic mounting bars split- where the bolt is held in place by the recessed nut- and the front rack was only held on by the one remaining mounting bar. It was not pleasant to see my kayak sliding towards the outside of the roof rack, going down I95 in Maine. Unless Thule changes the mounting hardware from plastic to metal, this rack is a dangerous. Cheap mounting seems to be a theme with Thule.

Each roof bike rack from Thule ensures your bike will get where you’re going without damage. Plus it is easy to load and unload even when you’re on your own. There is also a choice to suit your bike and how you want to transport it. Choose from fork-mounted carriers that include thru-axle options to wheel-mounted or “frame-hold” designed roof bike racks for a quick, precise hold and a more stable ride.


I bought this as an upgrade since we bought the Toyota Sequoia which is wider than my older Mercedes GL. I also ordered the Thule Outrigger which works nicely with the cross bar to load and unload our SUPs easier. The combination works very well. I offer a suggestion I did which also worked well with me. If you want kayaks or boards to roll easily over the cross bars and without scratching try this: Go to Home Depot and buy two 30-40" long (depending on the width of the car top) of 1.5" diameter PVC pipes and two-2" pipes of the same length. The 1.5" will fit inside the 2" pipe nicely and the cross bar will fit into the combination (through the 1.5" of course) very well. This will give you a very nice set of rollers for the two cross bars and if you buy the black color of pipes they will look very professional at a cost of less than $15. I tried so many commercial covers and rollers and nothing worked better than this home made one.
Aluminium bars include T-track slots which allow you to use the full length of the bars for load carrying. The WingBar not only looks good but more importantly includes a device which reduces wind noise to the minimum, as well as reducing drag. Many customers leave their Thule WingBars in place from week to week, especially if they are taller vehicles and fitting is awkward.
×