Web Analytics

The roof rack instructions are difficult to interpret. Here are tips from a sales person: The picture with the hand sqeezing does not mean completely secure, just means somewhat set in place. You completely secure,and hear the click, when on the car and screwing with the bolt/handle. Also, get the bolt/handle threaded properly into the foot before you shimmy it into the final position on your car, then tighten down. Also, Thule said that front and rear tie downs must be used on a verticle system because the wind force on long boats will tear almost anything off. Still, that piece of plastic is a crummy and dangerous attachment and needs replacing with something far more secure. Fyi Walden also makes a similar J system for kayaks but I haven't seen one up close.
If you’re looking for a serious overland adventure or #vanlife upgrade, the Aluminess Roof Rack is the only way to go. It handles any gear and cargo you can think to throw up there. Moreover, outfits like Main Line Overland can customize it to fit A/C units, solar panels and satellite TV. “A full-length Aluminess Mercedes Sprinter Roof Rack is highly customizable and provides a massive amount of storage capacity. The optional side ladder makes it easy to mount the walk-on roof for strapping on loads and enhancing your perspective at roadside stops. You could probably even host a Bushwick rooftop party on one of them.”
Lots of negative reviews here I don't understand. Some folks even saying it took 2 hours to put thier bake rack on thier vehicle. That could be the actual problem. They are all pretty simple in design four towers put them on tighten then put your bike on them. Never seen a bike rack that didn't allow the bike to sway some while driving on rough roads. They do make tie down straps for rugged terrain.

I own and use two Thule 815 Kayak Cradles that were purchased from Dick's Sporting Goods (DSG). Interestingly, there is no information about them on Thule's website. Apparently, the 815 is made to DSG's specifications. One I bought used off of eBay for $75 plus $13.25 shipping. According to the seller, it was used for three seasons before I got it. The other I just bought at DSG for $79.99 ($99.99 less a $20 off coupon) plus $4.80 tax. The box indicates that it was manufactured this year.
The data shown here, particularly the database as a whole, shall not be copied. The Data User shall refrain from copying and disseminating the data or the database as a whole and / or from causing such acts to be carried out by third parties, without TecDoc's prior consent. Any violation shall constitute a copyright infringement and shall be subject to prosecution.
I recently put my Thule J-racks on for their second season of use, only to fine that the mounting hardware is not for its second summer of use. The mounting bars (plastic) are cheap and split easily. There is a bolt inside the mounting bar that is supposed to stay stationary so that the bolt may tighten the rack to the rack. When plastic mounting bar splits, which doesn't take much, the bolt moves around making the hardware useless. Also, the bolts included with the racks rust at the mere mention of water. (Probably not the best thing for a kayak rack). The upside is that the J-rack itself is great, its just the mounting hardware that stinks- which can be replaced. I've yet to do it so I can't speak to how easy that is. Its not a bad rack for $85, just be prepared to replace and be careful witht the mounting hardware aspect of it.

I would like to tell you that I have been using the Thule on my Durango and I secure the boat by going around the factory rack (not using the Thule securing method of securing your boat to the rack only). I find that that when you synch down the Kayak the pressure is pushed down through the Thule kayak racks and onto the factory roof rack which "flexes" and therefore allows the Thule rack to do the minimum which is to hold your Kayak on its side securely. Also once the Kayak is loaded this way it would be rather difficult to dislodge that baby unless your doing 70MPH and slam on your breaks even then it may not go anywhere..it is pretty darn secure.
As a THULE 5-star dealer and winner of the prestigious ‘THULE DEALER OF THE YEAR’ award, The Journey Centre offers the full range of Thule products, including roof bars for all types of vehicles, roof boxes for the holiday season, plus a range of carriers for cycles, skis or water sports, along with the range of THULE luggage, backpacks and strollers.
Ordered a rack as a Xmas present with heaps of time for delivery. Their email said it was sent. No it wasn't. Had to make other Xmas arrangements in the end. When I called to cancel I was told that they weren't actually sure if it had been sent or not so wait a few days. WTF??? Waited a few days and still no rack. They then agreed to refund but it took a while for the money to show up (admittedly this was probably due to Xmas shutdown).
Thule 846 Quest Roof Bag Reviewed by Jason B (Douglas, MA) Reviewed for a 2002 Honda CR-V — 2006-08-29 07:07:50 I purchased this roof bag for my 2002 CR-V. Like the other reviews mentioned, the CR-V crossbars are a little too close together to allow the Quest bag to be fully stretched out. But, it sat nicely in between the crossbars and I packed it accordingly. I knew it was only water resistant and planned to only use it for some outdoor stuff (raft, oars, chairs, etc) that wouldn't matter if they got wet. Well, on the drive out to vacation, it rained lightly and everything was totally dry. One the drive home, it poured for a day and half, and everything inside was soaked. But that was totally expected - and if you plan for it, you will be fine. For the cost and convenience of being able to collapse the bag into a little pouch, the Thule Quest can not be beat for its value!!! VIEW MORE REVIEWSShop Thule 846 Quest Roof Bag | Shop Thule
I have been a long time fan of Thule racks and accessories. Then at sixty Mph my two week old Kayak departed the rack still attached to a new pair of Thule Hull-a-ports. Thule make a bomber rack system and the Hull-a-port is a great concept but why the plastic clamps?. The kayak landed safely in a snowbank but I worry about what might have happened.
Caveat: I was thinking of replacing the Js with a rail rider or something that I could put an extended crossbar on in order to lay the boats flat. Figured less wind resistance would equal better gas mileage. I was surprised to find on this trip my mileage was better than expected (19+ with a big hemi V8, not great but hey, it goes!)I attribute this to mainly reduced speeds on many of the non interstate highways where we were running 60-65.
Finding the perfect Thule roof rack couldn’t be simpler. Choose exactly what you need for your vehicle’s make, model and year. We’ll show you the perfect solution of strong, durable feet and roof bars plus fit kit. Or choose an all-in-one, pre-assembled roof rack that already matches your needs. Finally you can add options such as locks and locking straps so all your bases are covered. With a Thule roof rack, you’re all set to head off on your adventures and make sure you have everything you want with you. When combined with other Thule products, our roof racks are also a starting point for carrying the extra special gear that lets you live your passions – with holders for your bikes, your skis, your canoes or kayaks, and your surfboards. Not to mention extra-secure roof boxes and spacious carrier baskets for special cargos
To aid you with your rack selection process, The Rack Warehouse lists the most popular selling Thule 460R Rapid Podium Foot Complete Car Roof Rack fits alphabetically by Auto Manufacturer. You'll find perfect fitting roof racks for most of today's top selling vehicles on this list. Thule 460R Rapid Podium Foot Complete Car Roof Racks are designed for vehicles with factory fixed points, rail tracks and bolt through applications. If you don't see your vehicle on this list, simply click on the Thule Fit Guide at the top of the page, enter your vehicle information and the Thule Fit Guide will do the rest.
The data shown here, particularly the database as a whole, shall not be copied. The Data User shall refrain from copying and disseminating the data or the database as a whole and / or from causing such acts to be carried out by third parties, without TecDoc's prior consent. Any violation shall constitute a copyright infringement and shall be subject to prosecution.

The hull a port I like it because it fits almost every rack. And like most of the reviews wonder why it has plastic mountings. Well, figured that out one day when driving under a garage where the door was a little low. The clamps under the hull a port broke. But then don't think they were designed to drive into a roof. Have tightened those hex bolts pretty tight, so the plastic bends but doesn't break under designed usage. But the hullaports do shimmy and shake when there isn't a boat attached. The angle of the j-shape fits one of my boats perfectly (Chilco) but on my Quest it isn't deep enough, I would like a better fit.


However I am going to comment on some of the installation steps and things to watch out for as it is a little daunting to open the ProRide 598 and find the bags of various components. Once you’ve installed the ProRide all of the steps you took will be ‘obvious…in hindsight‘. In the future, mounting and unmounting the BIKE RACK will then only take about 5 minutes per bike rack.

On the other hand, it is very easy to use, with a pair of ratchet arms that securely lock the bike during transit, and are very simple to use – they also have a pretty wide loading range, and can accommodate up to 59cm frames. They also have a good load capacity of up to 35 pounds per bike position, which should be more than ample for the vast majority of bike types.
I initially purchased 4 #875 Hydra Glides to carry my kayaks on. However, the area of the pads seem too small and were putting dents in the hull when the boats were loaded. I decided to eat the $220.00 and install 2 Hull-A-Ports. They seem to carry more of the kayaks weight on the side as well as supply more area of contact. While installing, I noticed that the flange in the base where the base pad fits into, was broken on one of the Hull-A-Ports. I emailed Thule's support and asked them to replace the broken one and asked if I could buy a spare as it's obviously the weak point if it was broken out of the box! Thule's response was that I should take the Hull-A-Port to my dealer and ask them to call Thule while I am there! It's 100 miles round trip. My response to Thule was that this was CRAP and I asked if Thule was going to pay my time and mileage! I would rate them zero, but one is as low as this site goes!
Our roof bike racks are tested extensively in the Thule Test Center™ – a state-of-the-art facility for testing bike roof racks to the limit and beyond. They are also designed for maximum ease of use with many smart features added during development. You can be confident that your roof bike rack will carry your bike safely and securely wherever you want to go. And you’ll be in the saddle as quickly and easily as possible.
To simplify your ordering process, The Rack Warehouse lists the most popular selling Thule 450 Crossroad Foot Complete Car Roof Rack fits alphabetically by Auto Manufacturer. You'll find perfect fitting roof racks for most of today's top selling vehicles on this list. Thule 450 Crossroad Foot Complete Car Roof Racks are designed for vehicles with raised railings. If you don't see your vehicle on this list, simply click on the Thule Fit Guide at the top of the page, enter your vehicle information and the Thule Fit Guide will do the rest.
I was given my first Thule system back in 1992 when Thule was a sponsor of mine. I used that basic rack system along with numerous accessories up until the summer of 2015. The load bars were finally rusting [where I had drilled holes in them] and I felt I needed to replace them. My towers and my locks, however, are still my 1992 originals, and they're doing great.
TYRE DEFLATION: This has never happened to me. In theory if this happened during transport then the bike would become considerably more loosely attached. I don’t think it would fall off as the two front arms are locked together in place. If you purposefully deflated the tyres before attaching the bike to the UpRide then I would guess that vibration during transport WOULD damage your wheel rims to a small degree. Thieves MAY deflate your tyres to make the bike OR WHEEL more easy to remove – remember they can easily take out your wheel skewers.
Please, whatever you use, tie down the bow and stern. It doesn't matter how many times you haven't and nothing bad happened. It doesn't matter how little it shifts in the wind. It doesn't matter that you're 15 minutes from home and only driving on pavement. The point is that if a strap breaks you could easily kill someone in a following car. I read somewhere that no boat is ready to drive away until it has 6 lines on it: two each across the midsection, triangulated from the bow and triangulated from the stern. Take it to heart.
Aluminium bars include T-track slots which allow you to use the full length of the bars for load carrying. The WingBar not only looks good but more importantly includes a device which reduces wind noise to the minimum, as well as reducing drag. Many customers leave their Thule WingBars in place from week to week, especially if they are taller vehicles and fitting is awkward.
×