The lid has dual-layer construction, which adds stiffness for durability and ease-of-use while reducing drag for better MPG, as well as to lessen the noise. Spring-loaded hinges make accessing the box from either side of the vehicle a breeze, with lockable Smartlatch handles help make sure everything is shut up tight. Clamp mounts make the box compatible with most roof rack bar systems, though you’ll probably want to upgrade to one of Whispbar’s mounts to complete the look.
I managed to install two ProRides, the UpRide and a FreeRide simultaneously on one car (ie 4 bike racks). A total of 3 is relatively easy but adding the fourth bike rack required the pedals to be removed from the bikes and was quite a squeeze. If you are going to install 3 or 4 bike racks then you will need to alternate the direction in which they face (forward-back-forward-back) and you will need to ensure that the various closing mechanisms on each of the bike racks are relatively easily accessible. Good luck 😉 !
I originally purchased my Thule rack system in 1985 (for use on a Land Cruiser) and ‘upgraded’ in 1990 to the new style Thule racks (for a 4Runner), so I have a fair amount of experience with these racks. Although I have not purchased much new Thule gear lately, all of my 15-20 year old accessories work great. I use the 58” bars in the winter to hold my ski carrier and box. In the summer I use 78” bars to hold 2-3 canoes or kayaks, plus bikes. Given that most of my gear is so old, it is made of solid aluminum and steel and hasn’t given me one failure. Sure, I broke a fairing when I hit a flying rock at 60mph. And, I’ve lost a few of the nuts and nylon bar ends but these were easily replaced. But never have I had a fear of the rack coming off my truck. I’ve even caught a tree with one of my 78” bars, which bent the roof of my 4Runner pretty good. Still, the rack did not budge. My rack has spent a lot of time in Alaska and Minnesota winters and rust has never been much of a problem, either.
Grip-friendly outer handles and supporting lid-lifters make it easy to open from either side of the vehicle even when wearing gloves, with a clever slide-lock system with separate locking and opening functions to let you know when the lid’s in place and closed securely. It marries nicely with most after-market bar kits and comes in black, gray, and white.
The ProRide meets requirement number three no problem and is no problem when left in situ. Thule do advise you take it off when not in use as it will affect your fuel consumption. But I found it to be negligible, happily staying around 62-64 mpg on long motorway drives. With a bike on it typically dropped to nearer 60mpg, but this number is affected more by the way you drive than having a bike on the roof.
The one addition I’d like to see made to this is a clip to hold the wheel straps out of the way when putting the bike in place. You can tuck them behind the wheel mount, but I found they would often flip back over and get in between the tyre and the mount meaning you had to put the bike down, tuck the strap out of the way again before picking the bike up to put in place. Not a big deal, just mildly annoying.