I started my ‘Roof Bar career’ with some cheap ones I used for windsurfing, and they lasted about 6 months before the powder coating started to split and corrosion set in. I then did what my brother told me to do from the start and buy Thule. That first set lasted about 8yrs as a permanent feature on my Vauxhall Nova and looked almost brand new when I removed them. I’ve never considered anything else since. They may appear expensive up front, but it’s not like a handbag where you’re paying for a brand name and nothing more, you’re paying for a proper quality engineered product.
Thule 4027 Top Rack Mounting Fitting Kit Pack of 4. Audi Q3 2012-2018. Condition is Used. Dispatched with Royal Mail 2nd Class. Rubber mounts all in great condition Will be delivered in a box that says kit 4031, but this is kit 4027 (I purchased roof bars with kit 4027 attached and do not need - hence sale) No instructions, but easy to find on internet Sold as seen, grab a bargain!
After reading the reviews here by some users who had issues with the older clamps, I contacted Thule support and they offered to send me a set of new metal hardware at no charge. The support rep. said that most of the problems with older design were probably caused by non-use of bow and stern tie downs, and strongly recommended doing this, even with the updated mounting plates. A few weeks later I received the plates, installed them, and everything seems to be solid but I think I'll still be using tie downs just to be on the safe side. Just noticed Yakima is now making racks similar to the Hull A Ports and also recommend securing the bow and stern. Guess they're playing "C-Y-A", too.
You see we've already got our front rail installed. Just use a reference mark here to make sure we have that in line. You're going to do the same thing here in the backside.Once we have that position from both sides, we want to check the overhang that we have on our bars. We'll just add as well. The overhang's going to be this portion here. I just want to make sure we have equal overhang on both sides. It doesn't have to be perfect, but it certainly looks better if it is. All right. Once we've got that where we want it, you want to grab the tool that is provided. This is a torque limiting tool, so basically it's going to tell us when we have our bars tightened down all the way. This is a four nanometer tool. Right here it says Ford inaudible 00:02:09 Newton meter, this is a Ford Newton meter clamp. So, we'll just start tightening this up. I like to snug this one down pretty well. Make sure that this portion here comes over and makes contact with my race side rail there. Once I get that pretty snug, I'm going to go over and do that other side.Now, these roof rack systems are going to be an excellent way to free up some space inside your vehicle of course. Bike racks, cargo carriers, rooftop cargo boxes, kayak carriers, just all kinds of different accessories that you can put up here on the roof line. Ski and snowboard carriers or really the enclosed ones, even if you want to transport some luggage and stuff like that, keep them out of the elements. Now I'm gonna go ahead and torque this one down until my tool indicates, you see that's just like a gas cap basically. Once it's tight enough, it's just going to click. Same thing here.Now with the Evo Bar, something I do like, you see this cap is going to come right open. That allows us to get into our T-slot accessory and no longer do we have to remove the long rubber strip and cut it. Our accessory can slide right in that gap and almost self seals right around it. Makes it really easy to use. Just pop that back down like that. To finish up our install though, we do want to cap off our end caps here. Tab here is going to go on the top, push that bottom in and at that point, you'll just rotate this 180 degrees into it's locked position to lock that cap on. These are just plastic cores. You can do these using a screwdriver, so if you wanted additional security, you want it to be able to lock and we do have the Thule locking keys you can put in there and then actually have a key lock to keep that nice and protected.The bars do come in a black or a silver, so if you wanted something to blend in with the Cherokee, I'd go with the silver. You want something to stand out, I'd go with the black and then I'll show you on that front bar here on the bottom side, once we get everything in position, we've got a little tab right here. We pull that tab over to our foot pack. That's going to eliminate any gaps in the bottom of that crossbar. Really going to help to eliminate wind noise. You can see right here, just gonna pull that over. It's going to close up that gap. Same thing on our front bar. Th
Shortly after we bought the rack, our little mazda 2 was rear ended by a texting idiot. Before the car was repaired, I decided to try and test the rack to see if I could damage the tailgate with the rack. I tightened it up really hard and grabbed the mounting arms and shook the car around on it's suspension and it did not bend or damage the tailgates panel edges at all.
These car roof bars come with wordless (diagrams-only) fitting instructions that are difficult to comprehend and, in the case of a Peugeot 306 hatchback, specify the wrong assembly settings. The result is roof bars that cannot be fitted to the car or, at best, can be fitted only with extreme difficulty and at risk of damaging both the racks and the car body.
If your road trips always include skis, snowboards, surfboards, deep sea fishing poles, or other items that often stretch the length of most sedans, the Inno Shadow 16 has you covered. Though it only boasts 11 cubic feet of storage, it can accommodate up to six snowboards, eight skis, or two surfboards. The proprietary Memory Mount System makes it easy to toss the box on and off as needed without fiddling with over-engineered mounting hassles. Its svelte profile and “Diffuser Design” lets it slice through wind to reduce drag and noise, with a three-layer sheet base construction that makes it lighter and stronger than most conventional carbo boxes. As with most models, it opens from both sides and has universal cross bar compatibility.
Also have two of the cheaper thule bike racks (maybe they dont even make them any more) ,and again these are mostly fine, the only complaint I have about these is that they are the clamp on type, and the T bolt siezes in the clamp, which most of the time is not a problem, as you should never need to adjust the clamp size. However If I want to use my rack on a friends roof bars (not thule), the clamp size needs altering, but is difficult to do as the T bolt has siezed in the clamp.
The rear strap design now requires the strap to go at an angle rather than directly over the wheel (as with previous Thule rack models). Make sure that you twist the strap clasp lock as well so it points to about 2 o’clock. I’m not entirely sure why this aspect of the design was changedm the straight-through strap always seemed fine to me and was more easily stowed away.
There are a number of roof rack manufacturers providing equipment that although suits a purpose, is not suitable for carrying canoes, kayaks or bikes as it cannot handle the weight of these items. We exclusively sell Thule roof racks and cycle carriers which are well designed and can handle the weight and bulk of modern sports equipment. We don't sell anything we wouldn't be happy using ourselves and we're a picky bunch!
The hull a port I like it because it fits almost every rack. And like most of the reviews wonder why it has plastic mountings. Well, figured that out one day when driving under a garage where the door was a little low. The clamps under the hull a port broke. But then don't think they were designed to drive into a roof. Have tightened those hex bolts pretty tight, so the plastic bends but doesn't break under designed usage. But the hullaports do shimmy and shake when there isn't a boat attached. The angle of the j-shape fits one of my boats perfectly (Chilco) but on my Quest it isn't deep enough, I would like a better fit.
One caveat is the measurements in the instructions to install the bars are wrong, not really sure where they came up with those (or maybe there were for a different length bar? I went with 60" which seem perfect for my van) but after a little finagling was able to get them evenly set up on my own. Not even worth taking a star off in my opinion, but I can understand if someone were confused or unhappy. I'm mechanically inclined so it was maybe a 10 minute bump in the road, just had to figure out what measurement would be equal from the end of the bar to the edge of the foot on each side of the car, and beware, the front and rear bar measurements will not be the same. I started by eye and refined it by measurement, and put a sharpie marker on the bottom in case I have to remove them, done and done.
I replaced my 89 Plymouth Voyager with a 98 Voyager and the roof rack stinks for my canoe and kayak. I replace it with the Thule rack. This rack is strong and sturdy worth every penny. The factory installed racks could slide back and forth and the Thule can't slide with loosening the bolts. I have no intention of ever moving them so I have no problem with this.
No caps included. Really!?! Is this too much to ask? It is hard to believe that ordering Roof racks has so much deception involved. Yakima won't give parts numbers unless you go to a dealer, Thule leaves out pictured parts. Now I have to chase these caps down before installation. What else don't I know about this deal? Make sure you understand what I am saying: If ordering is not clear, it is NOT A QUALITY item. Go to a product that promotes honesty. I am open to suggestions. Right now I am considering sending the whole deal back.
Originally I bought them because our car didn't have the width for two boats to sit side-by-side. But they support our plastic touring boats (Necky, Looksha IV), very nicely. The fear of oil-canning the hulls by supporting them in traditional saddles is all but gone. The hull-a-ports hold the boats vertically and in even the strongest cross winds, the two straps (provided, with buckle bumpers) are enough to hold the boats in place with ease...and not so much pressure that you'll bend the hulls.
Cycling Plus is the manual for the modern road cyclist. Whether you're cycling weekly, an occasional new rider or a Tour de France fan you’ll find everything you need. Every issue is packed with expert reviews of the latest road bikes and gear, inspirational routes and rides, evocative features that take you inside every aspect of cycling and unmatched nutrition, fitness and training advice.
As a wheel-mount bike rack, there is no frame contact made which means it’s one of the best options for transporting bikes with carbon fiber frames. It’s also well-suited for bikes with odd-shaped frame designs or tubing such as downhill mountain bikes with rear suspension systems integrated into the frame or bikes with lots of frame-mounted accessories.
At ReRack we only sell racks and parts from top-quality manufacturers like Yakima, Thule and Rhino-Rack. These roof racks are typically able to support more weight and gear than standard factory racks. The price of a base roof rack will depend on if you want new items or not, aerodynamic profile or not, and your vehicle year/make/model. There are complete roof rack setups starting under $150 for a used rack on older vehicles, all the way through $500+ for a new, aerodynamic top-of-the-line setup.
Thule Transporter Cargo Box Reviewed by Ray G (Kewadin, MI) — 2007-09-19 03:58:46 Have it on a Roadtrek Versatile Class B motorhome. Perfect for my needs-well made. Size makes it difficult to put on and take off. Hope to make a stand which will make it easier to install and remove. VIEW MORE REVIEWSShop Thule Transporter Cargo Box | Shop ThuleShop Popular Thule Roof Racks & Cargo Carriers ProductsThule 690 MOAB Cargo Basket Thule 846 Quest Roof Bag Thule 857 Caravan Roof Cargo Bag Thule 867 Tahoe Roof Cargo Bag Thule Base Rack System Thule Fairings Thule Glide and Set Watersport Roof Rack Thule Goal Post Canoe Carrier Please feel free to call toll-free (800) 874-8888 or e-mail [email protected] with any questions. We are delighted to be of assistance in finding the right auto parts for you, be they car parts, truck parts or SUV parts.
Lots of negative reviews here I don't understand. Some folks even saying it took 2 hours to put thier bake rack on thier vehicle. That could be the actual problem. They are all pretty simple in design four towers put them on tighten then put your bike on them. Never seen a bike rack that didn't allow the bike to sway some while driving on rough roads. They do make tie down straps for rugged terrain.
The WBT31 comes fully built and ready to use. Optional extras include a wall storage hook (£10) if you want to keep it off the floor, a dust/rain cover (£20), good for storing in a hostile environment, and a ramp (£35) for loading heavy bikes or if you aren't happy lifting them vertically onto the rack. The ramp fits all four bike positions on either side and stows securely in a holder on the rack, ready to use at your destination. I always used the ramp for getting our 30kg (plus whatever's in the panniers) Workcycles FR8 Dutch bike on and off the rack – it's fast to use and minimises the risk of slipping and dropping a very heavy bike.
Description: Replacement keys cut for Roof Racks, Roof Bars, Roof Boxes, Storage Boxes, Ski Racks, Cycle Racks, Tow Ball, Rear Mounted Bike Carriers etc.. We use the latest up to date electronic technology for cutting keys to code. Code Series from N001 - N250 Code Series from N001R - N200R Code Series from N001M - N200M Your lock code is located on the face of the lock Savings apply when you buy more then one key of the same code