Web Analytics

Roof bars are an essential item if you want to fit a roof mounted cycle rack to your car. Designed to work with a car roof rail system roof bars are the base for attaching a range of car roof storage systems including cycle roof racks. Roof bars like the Thule Gutterless Rapid System are available for cars with normal roofs that don’t feature roof rails.
Strap Mounted – Designed primarily for vehicles without a hitch receiver. The plus points for this type is that they are typically easier to mount than the other styles, making them perfect for occasional use as you can get them on and off quickly. They are also typically cheaper than the other styles of the rack. On the negative side, as they lack a truly solid attaching point they are not as secure, and you must ensure that you attach them properly before loading up the bikes.
Ironically, after posting my review of the Thule J-racks, I just about lost a kayak this past weekend coming back from Maine, due to the cheap mounting hardware included with the Thule J-rack. One of the plastic mounting bars split- where the bolt is held in place by the recessed nut- and the front rack was only held on by the one remaining mounting bar. It was not pleasant to see my kayak sliding towards the outside of the roof rack, going down I95 in Maine. Unless Thule changes the mounting hardware from plastic to metal, this rack is a dangerous. Cheap mounting seems to be a theme with Thule.
Lots of negative reviews here I don't understand. Some folks even saying it took 2 hours to put thier bake rack on thier vehicle. That could be the actual problem. They are all pretty simple in design four towers put them on tighten then put your bike on them. Never seen a bike rack that didn't allow the bike to sway some while driving on rough roads. They do make tie down straps for rugged terrain.

To make your rack selection process easier, The Rack Warehouse lists the most popular selling Thule 450r Rapid AeroBlade Crossroad Foot Complete Car Roof Rack fits alphabetically by Auto Manufacturer. You'll find perfect fitting roof racks for most of today's top selling vehicles on this list. Thule 450r Rapid AeroBlade Crossroad Foot Complete Car Roof Racks are designed for vehicles with raised railings. If you don't see your vehicle on this list, simply click on the Thule Fit Guide at the top of the page, enter your vehicle information and the Thule Fit Guide will do the rest.
A change of car has forced me to seek out a new set of roofbars. I wanted the best set of roof bars for my car without going silly on the cost. This time I have went for the Thule Wing bars. These are known as the Thule Aeroblades in some parts of the word. I love cars that can have a set of roof bars bolted to them, either to fittings hidden within the roof or roof rails. The new Unsponsored HQ paddle wagon/family transporter is a very sensible two litre 184bhp BMW 320d Sport.
Dear Phil, I have read over the reviews you sent us regarding the Thule Hull-a-Port. Being the manager in charge of returns, warranties, and exchanges at the Rack Warehouse I have had some experience with the problems noted in the reviews. The problem of the plastic mounting hardware breaking has happened before, but it is not at all common. Since we have sold the Hull-a-Port, we have had two sent back to us for warranty of this problem. Both of these racks came back last year (the first year this product was available), and this year's Hull-a-Ports have not been any problem for us. We have sold hundreds of units this summer, without one call about this problem. Usually people get back to us right away if there are problems with the system we sent them. I suggest the Hull-a-Port as an option for many people because of its ease of use and flexibility. If you are worried about the mounting brackets, I would suggest following one of the reviewer's advice and secure the boat down to the bar as well. I always use the load bar to secure my straps because the bars are always stronger than the accessory on top of them. Also, both the box the rack comes in and the instructions tell you that the bow and stern strap is required. To be on the safe side and ease your mind, use the bow / stern straps. Please call me if you have more questions or concerns. Thank you, Mary S., The Rack Warehouse 800-272-5362
As a wheel-mount bike rack, there is no frame contact made which means it’s one of the best options for transporting bikes with carbon fiber frames. It’s also well-suited for bikes with odd-shaped frame designs or tubing such as downhill mountain bikes with rear suspension systems integrated into the frame or bikes with lots of frame-mounted accessories.
Last year I bought a Suburban (now I have two racked vehicles) and bought a set of Thule #450 Crossroads to mount to the factory rails. I was little concerned about the rack coming loose. Not that the rack would have a problem, but rather the factory rails would rip out of the Suburban’s roof. Happy to say, after several 1500 mile trips to Maine and Hilton Head my concerns have been but aside. This thing is as rock solid as I was used to.
If, like me, you are upgrading from an earlier Thule FreeRide FR35 then preparing the clamping mechanism for the bike frame is unchanged. The black ends of the clamping arm each have two holes and you use the one which corresponds to your frame size. If your partner or children have notably different bike sizes to you then you might have to change this regularly…on the previous model I never had to change it in about 10 years.
Wobble – At speed your front wheel will wobble. I doubt you will stop all of the wobbling. However you want the frame NOT to wobble much at all. In my opinion this design is better at wobble control than the cheaper FreeRide (then again, I’ve used the FreeRide for over 10 years on motorways, admittedly with occasionally worried glances up through the car’s sunroof)

I bought this as an upgrade since we bought the Toyota Sequoia which is wider than my older Mercedes GL. I also ordered the Thule Outrigger which works nicely with the cross bar to load and unload our SUPs easier. The combination works very well. I offer a suggestion I did which also worked well with me. If you want kayaks or boards to roll easily over the cross bars and without scratching try this: Go to Home Depot and buy two 30-40" long (depending on the width of the car top) of 1.5" diameter PVC pipes and two-2" pipes of the same length. The 1.5" will fit inside the 2" pipe nicely and the cross bar will fit into the combination (through the 1.5" of course) very well. This will give you a very nice set of rollers for the two cross bars and if you buy the black color of pipes they will look very professional at a cost of less than $15. I tried so many commercial covers and rollers and nothing worked better than this home made one.
As a final consideration, even though the UpRide will hold practically any bike you can hoist into its ratcheting hook arm, it really shines when securing bikes with wider tires inflated to lower pressures—i.e. mountain bikes, hybrids, cruisers, and fat bikes. Simply put, the hook can grip the bigger, softer tires easier than with the skinny, high-pressure tires found on road bikes.
There are a number of roof rack manufacturers providing equipment that although suits a purpose, is not suitable for carrying canoes, kayaks or bikes as it cannot handle the weight of these items. We exclusively sell Thule roof racks and cycle carriers which are well designed and can handle the weight and bulk of modern sports equipment. We don't sell anything we wouldn't be happy using ourselves and we're a picky bunch!
These are ideal if you are carrying kayaks or bikes and know that lifting these into the centre of the roof will put a strain on your back. They're almost essential for safe loading on tall and / or wide vehicles. The bars slide out so you can load, for example, two bikes on the left side of your vehicle, then slide them the other way and load two more on the right. They're brilliant.
×